Thinking of you {rainbowlin}

How To Clearn Your North Face Jackets
In the washing down north face outlet, the first thing should be placed in clean water immersion for half an hour or so, and then rubbed gently, let the water for the elimination the dust that stick on the north face sale . Then pour away the water clear water enclosed into just the right amount of low foam neutral detergent, solventing-posive capacity to superimposedfield down products as the standard, 20 minutes after a soft brush in down products brush lightly on again, and then wash.
In the cleaning procedure, you will fold down the north face jacket and post-pressure dry, must not hand rubbed with gynostemma or board, as this will damage effects down fibers, warm. In the above mentioned may be down products the same amounts in sheet metal, and then a little dry with a clean cloth obscured the Sun, but do not leave too long, dry back hand fluff down, flip side cured, pending a thorough drying
North face down jacket lavation 3 aspects to be considered undo: 1st, the utter destruction of dry cleaning. Because the dry cleaning, tetachloroethylene drops will break down the effect of protein, warm, and drying process capacity so that the fabric of aging. 2nd, the utter destruction of alkaline washing procedures so as to avoid lotio debinding down too brittle. 3rd, don't ironing hand washing your north face jackets enough.
--youxiaoyan

I LOVE THIS ! hahas.. the image.. but the paint splatter abit weird.. jyjy

Thanks ppl!=))

Nice image But i think that the red doesn't go with the yellow. Not forgetting the white and that purple splatter in the image. ( which, is sooo out of place ) But effort has been seen and improvement can still be made

Its not too late!
its never too late in fact

Not bad... I kinda like the color schemes you're going for. But somehow some colors are like out of place, like the magenta color brush. I also think the bg color for the text area is too bright. Maybe tone down the red abit. Cropping of the model is quite rough too. I don't know what tool you use, but I suggest zooming in (+100% maybe) and then only start cutting out the image.

Other than those that I've mentioned, I think you're in the right direction. Just need to fix a little here and there. I'm sure you'll do better next time. =) Gambatte!